dmesg - AMD GX-420CA SOC

Return To AMD GX-420CA SOC System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.5.0-17-amd (root@shabsubuntu1210) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #28 SMP Thu Dec 27 05:27:35 CST 2012 (Ubuntu 3.5.0-17.28-amd 3.5.5)
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000005ac68fff] usable
BIOS-e820: [mem 0x000000005ac69000-0x000000005db68fff] reserved
BIOS-e820: [mem 0x000000005db69000-0x000000005dc88fff] ACPI NVS
BIOS-e820: [mem 0x000000005dc89000-0x000000005dd08fff] ACPI data
BIOS-e820: [mem 0x000000005dd09000-0x000000005ebfffff] usable
BIOS-e820: [mem 0x000000005ec00000-0x000000005effffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fecfffff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
DMI 2.7 present.
DMI: AMD Corporation eKabini Platform/OliveHill, BIOS SL14 Test Bios 50416T00 04/16/2015
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x5ec00 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 0000000000 mask FF80000000 write-back
  1 base 005F000000 mask FFFF000000 uncachable
  2 base 0060000000 mask FFE0000000 uncachable
  3 base 00FFC00000 mask FFFFC00000 write-protect
  4 base 00FED80000 mask FFFFFFF000 uncachable
  5 disabled
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
found SMP MP-table at [mem 0x000fbcf0-0x000fbcff] mapped at [ffff8800000fbcf0]
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000098000] 98000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x5ebfffff]
 [mem 0x00000000-0x3fffffff] page 1G
 [mem 0x40000000-0x5ebfffff] page 2M
kernel direct mapping tables up to 0x5ebfffff @ [mem 0x1fffe000-0x1fffffff]
RAMDISK: [mem 0x362e2000-0x37168fff]
ACPI: RSDP 00000000000f0120 00024 (v02 PTEC  )
ACPI: XSDT 000000005dd08200 00094 (v01 PTEC   OEMTABLE 00000002 PTEC 00000002)
ACPI: FACP 000000005dd07000 0010C (v05 PTEC   OEMTABLE 00000002 PTEC 00000002)
ACPI: DSDT 000000005dcfe000 059F7 (v01 PTEC        AMD 00001000 INTL 20110316)
ACPI: FACS 000000005dc52000 00040
ACPI: HPET 000000005dd06000 00038 (v01 PTEC   OEMTABLE 00000002 PTEC 00000002)
ACPI: APIC 000000005dd05000 00090 (v02 PTEC   OEMTABLE 00000002 PTEC 00000002)
ACPI: MCFG 000000005dd04000 0003C (v01 PTEC   OEMTABLE 00000002 PTEC 00000002)
ACPI: FPDT 000000005dcfd000 00044 (v01 PTEC   OEMTABLE 00000002 PTEC 00000002)
ACPI: UEFI 000000005dcfc000 00042 (v01 PTEC   OEMTABLE 00000002 PTEC 00000002)
ACPI: POAT 000000005dc2e000 00055 (v03 PTEC   OEMTABLE 00000002 PTEC 00000002)
ACPI: BATB 000000005dcfb000 00046 (v01 PTEC   OEMTABLE 00000002 PTEC 00000002)
ACPI: SSDT 000000005dcfa000 00CB4 (v01 AMD    AGESA    00000001 AMD  00000001)
ACPI: SSDT 000000005dcf5000 04935 (v02 AMD    AGESA    00000002 MSFT 04000000)
ACPI: UEFI 000000005dcf4000 0027E (v01 PTEC   OEMTABLE 00000002 PTEC 00000002)
ACPI: SSDT 000000005dcf2000 013D7 (v01    AMD CPMDFIGP 00000001 INTL 20110316)
ACPI: SSDT 000000005dcf1000 00D4E (v01    AMD CPMZPODD 00000001 INTL 20110316)
ACPI: SSDT 000000005dcef000 010C2 (v01    AMD   CPMCMN 00000001 INTL 20110316)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000005ebfffff]
Initmem setup node 0 [mem 0x00000000-0x5ebfffff]
  NODE_DATA [mem 0x5ebfc000-0x5ebfffff]
 [ffffea0000000000-ffffea00017fffff] PMD -> [ffff880059400000-ffff88005abfffff] on node 0
Zone ranges:
  DMA      [mem 0x00010000-0x00ffffff]
  DMA32    [mem 0x01000000-0xffffffff]
  Normal   empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00010000-0x0009dfff]
  node   0: [mem 0x00100000-0x5ac68fff]
  node   0: [mem 0x5dd09000-0x5ebfffff]
On node 0 totalpages: 375534
  DMA zone: 64 pages used for memmap
  DMA zone: 6 pages reserved
  DMA zone: 3912 pages, LIFO batch:0
  DMA32 zone: 6000 pages used for memmap
  DMA32 zone: 365552 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x05] address[0xfec01000] gsi_base[24])
IOAPIC[1]: apic_id 5, version 33, address 0xfec01000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x43538210 base: 0xfed00000
SMP: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 72
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 000000005ac69000 - 000000005db69000
PM: Registered nosave memory: 000000005db69000 - 000000005dc89000
PM: Registered nosave memory: 000000005dc89000 - 000000005dd09000
e820: [mem 0x5f000000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88005e800000 s83584 r8192 d22912 u524288
pcpu-alloc: s83584 r8192 d22912 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 369464
Policy zone: DMA32
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 1446392k/1552384k available (6713k kernel code, 50248k absent, 55744k reserved, 6457k data, 928k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
	RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:16640 nr_irqs:1024 16
spurious 8259A interrupt: IRQ7.
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
allocated 6291456 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 1996.199 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3992.39 BogoMIPS (lpj=7984796)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
tseg: 005ec00000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
LVT offset 1 assigned for vector 0xf9
ACPI: Core revision 20120320
ftrace: allocating 25127 entries in 99 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD GX-420CA SOC with Radeon(tm) HD Graphics    stepping 01
Performance Events: AMD PMU driver.
... version:                0
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   0
... event mask:             000000000000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
Booting Node   0, Processors  #1 #2 #3 Ok.
Brought up 4 CPUs
Total of 4 processors activated (15969.59 BogoMIPS).
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0x5db69000-0x5dc88fff] (1179648 bytes)
dummy: 
RTC time: 15:29:14, date: 06/23/15
NET: Registered protocol family 16
Trying to unpack rootfs image as initramfs...
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
bio: create slab  at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: >host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: >host bridge window [mem 0x000c0000-0x000c1fff]
pci_root PNP0A08:00: >host bridge window [mem 0x000c2000-0x000c3fff]
pci_root PNP0A08:00: >host bridge window [mem 0x000c4000-0x000c5fff]
pci_root PNP0A08:00: >host bridge window [mem 0x000c6000-0x000c7fff]
pci_root PNP0A08:00: >host bridge window [mem 0x000c8000-0x000c9fff]
pci_root PNP0A08:00: >host bridge window [mem 0x000ca000-0x000cbfff]
pci_root PNP0A08:00: >host bridge window [mem 0x000cc000-0x000cdfff]
pci_root PNP0A08:00: >host bridge window [mem 0x000ce000-0x000cffff]
pci_root PNP0A08:00: >host bridge window [mem 0x000d0000-0x000d1fff]
pci_root PNP0A08:00: >host bridge window [mem 0x000d2000-0x000d3fff]
pci_root PNP0A08:00: >host bridge window [mem 0x000d4000-0x000d5fff]
pci_root PNP0A08:00: >host bridge window [mem 0x000d6000-0x000d7fff]
pci_root PNP0A08:00: >host bridge window [mem 0x000d8000-0x000d9fff]
pci_root PNP0A08:00: >host bridge window [mem 0x000da000-0x000dbfff]
pci_root PNP0A08:00: >host bridge window [mem 0x000dc000-0x000ddfff]
pci_root PNP0A08:00: >host bridge window [mem 0x000de000-0x000dffff]
pci_root PNP0A08:00: >host bridge window [mem 0x000e0000-0x000e1fff]
pci_root PNP0A08:00: >host bridge window [mem 0x000e2000-0x000e3fff]
pci_root PNP0A08:00: >host bridge window [mem 0x000e4000-0x000e5fff]
pci_root PNP0A08:00: >host bridge window [mem 0x000e6000-0x000e7fff]
pci_root PNP0A08:00: >host bridge window [mem 0x000e8000-0x000e9fff]
pci_root PNP0A08:00: >host bridge window [mem 0x000ea000-0x000ebfff]
pci_root PNP0A08:00: >host bridge window [mem 0x000ec000-0x000edfff]
pci_root PNP0A08:00: >host bridge window [mem 0x000ee000-0x000effff]
pci_root PNP0A08:00: >host bridge window [mem 0x7f000000-0xf7ffffff]
pci_root PNP0A08:00: >host bridge window [mem 0xfc000000-0xfdffffff]
pci_root PNP0A08:00: >host bridge window [mem 0xfed40000-0xfed44fff]
pci_root PNP0A08:00: >host bridge window [io  0x0000-0x0cf7]
pci_root PNP0A08:00: >host bridge window [io  0x0d00-0xffff]
pci_root PNP0A08:00: >ignoring host bridge window [mem 0x000ce000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000ce9ff])
PCI host bridge to bus 0000:00
pci_bus 0000:00: >root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: >root bus resource [mem 0x000c0000-0x000c1fff]
pci_bus 0000:00: >root bus resource [mem 0x000c2000-0x000c3fff]
pci_bus 0000:00: >root bus resource [mem 0x000c4000-0x000c5fff]
pci_bus 0000:00: >root bus resource [mem 0x000c6000-0x000c7fff]
pci_bus 0000:00: >root bus resource [mem 0x000c8000-0x000c9fff]
pci_bus 0000:00: >root bus resource [mem 0x000ca000-0x000cbfff]
pci_bus 0000:00: >root bus resource [mem 0x000cc000-0x000cdfff]
pci_bus 0000:00: >root bus resource [mem 0x000d0000-0x000d1fff]
pci_bus 0000:00: >root bus resource [mem 0x000d2000-0x000d3fff]
pci_bus 0000:00: >root bus resource [mem 0x000d4000-0x000d5fff]
pci_bus 0000:00: >root bus resource [mem 0x000d6000-0x000d7fff]
pci_bus 0000:00: >root bus resource [mem 0x000d8000-0x000d9fff]
pci_bus 0000:00: >root bus resource [mem 0x000da000-0x000dbfff]
pci_bus 0000:00: >root bus resource [mem 0x000dc000-0x000ddfff]
pci_bus 0000:00: >root bus resource [mem 0x000de000-0x000dffff]
pci_bus 0000:00: >root bus resource [mem 0x000e0000-0x000e1fff]
pci_bus 0000:00: >root bus resource [mem 0x000e2000-0x000e3fff]
pci_bus 0000:00: >root bus resource [mem 0x000e4000-0x000e5fff]
pci_bus 0000:00: >root bus resource [mem 0x000e6000-0x000e7fff]
pci_bus 0000:00: >root bus resource [mem 0x000e8000-0x000e9fff]
pci_bus 0000:00: >root bus resource [mem 0x000ea000-0x000ebfff]
pci_bus 0000:00: >root bus resource [mem 0x000ec000-0x000edfff]
pci_bus 0000:00: >root bus resource [mem 0x000ee000-0x000effff]
pci_bus 0000:00: >root bus resource [mem 0x7f000000-0xf7ffffff]
pci_bus 0000:00: >root bus resource [mem 0xfc000000-0xfdffffff]
pci_bus 0000:00: >root bus resource [mem 0xfed40000-0xfed44fff]
pci_bus 0000:00: >root bus resource [io  0x0000-0x0cf7]
pci_bus 0000:00: >root bus resource [io  0x0d00-0xffff]
pci 0000:00:00.0: >[1022:1536] type 00 class 0x060000
pci 0000:00:01.0: >[1002:9831] type 00 class 0x030000
pci 0000:00:01.0: >reg 10: [mem 0x80000000-0x8fffffff 64bit pref]
pci 0000:00:01.0: >reg 18: [mem 0x90000000-0x907fffff 64bit pref]
pci 0000:00:01.0: >reg 20: [io  0x3000-0x30ff]
pci 0000:00:01.0: >reg 24: [mem 0x90c00000-0x90c3ffff]
pci 0000:00:01.0: >reg 30: [mem 0xfffe0000-0xffffffff pref]
pci 0000:00:01.0: >supports D1 D2
pci 0000:00:01.0: >PME# supported from D1 D2 D3hot
pci 0000:00:02.0: >[1022:1538] type 00 class 0x060000
pci 0000:00:02.1: >[1022:1439] type 01 class 0x060400
pci 0000:00:02.1: >PME# supported from D0 D3hot D3cold
pci 0000:00:02.2: >[1022:1439] type 01 class 0x060400
pci 0000:00:02.2: >PME# supported from D0 D3hot D3cold
pci 0000:00:02.3: >[1022:1439] type 01 class 0x060400
pci 0000:00:02.3: >PME# supported from D0 D3hot D3cold
pci 0000:00:02.4: >[1022:1439] type 01 class 0x060400
pci 0000:00:02.4: >PME# supported from D0 D3hot D3cold
pci 0000:00:02.5: >[1022:1439] type 01 class 0x060400
pci 0000:00:02.5: >PME# supported from D0 D3hot D3cold
pci 0000:00:10.0: >[1022:7814] type 00 class 0x0c0330
pci 0000:00:10.0: >reg 10: [mem 0x90c44000-0x90c45fff 64bit]
pci 0000:00:10.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:11.0: >[1022:7801] type 00 class 0x010601
pci 0000:00:11.0: >reg 10: [io  0x3118-0x311f]
pci 0000:00:11.0: >reg 14: [io  0x3124-0x3127]
pci 0000:00:11.0: >reg 18: [io  0x3110-0x3117]
pci 0000:00:11.0: >reg 1c: [io  0x3120-0x3123]
pci 0000:00:11.0: >reg 20: [io  0x3100-0x310f]
pci 0000:00:11.0: >reg 24: [mem 0x90c48000-0x90c483ff]
pci 0000:00:11.0: >PME# supported from D3hot
pci 0000:00:12.0: >[1022:7807] type 00 class 0x0c0310
pci 0000:00:12.0: >reg 10: [mem 0x90c47000-0x90c47fff]
pci 0000:00:12.2: >[1022:7808] type 00 class 0x0c0320
pci 0000:00:12.2: >reg 10: [mem 0x90c48600-0x90c486ff]
pci 0000:00:12.2: >supports D1 D2
pci 0000:00:12.2: >PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:13.0: >[1022:7807] type 00 class 0x0c0310
pci 0000:00:13.0: >reg 10: [mem 0x90c46000-0x90c46fff]
pci 0000:00:13.2: >[1022:7808] type 00 class 0x0c0320
pci 0000:00:13.2: >reg 10: [mem 0x90c48500-0x90c485ff]
pci 0000:00:13.2: >supports D1 D2
pci 0000:00:13.2: >PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:14.0: >[1022:780b] type 00 class 0x0c0500
pci 0000:00:14.2: >[1022:780d] type 00 class 0x040300
pci 0000:00:14.2: >reg 10: [mem 0x90c40000-0x90c43fff 64bit]
pci 0000:00:14.2: >PME# supported from D0 D3hot D3cold
pci 0000:00:14.3: >[1022:780e] type 00 class 0x060100
pci 0000:00:14.7: >[1022:7813] type 00 class 0x080501
pci 0000:00:14.7: >reg 10: [mem 0x90c48400-0x90c484ff]
pci 0000:00:18.0: >[1022:1530] type 00 class 0x060000
pci 0000:00:18.1: >[1022:1531] type 00 class 0x060000
pci 0000:00:18.2: >[1022:1532] type 00 class 0x060000
pci 0000:00:18.3: >[1022:1533] type 00 class 0x060000
pci 0000:00:18.4: >[1022:1534] type 00 class 0x060000
pci 0000:00:18.5: >[1022:1535] type 00 class 0x060000
pci 0000:00:02.1: >PCI bridge to [bus 01-01]
pci 0000:00:02.2: >PCI bridge to [bus 02-03]
pci 0000:00:02.2: >  bridge window [io  0x2000-0x2fff]
pci 0000:00:02.2: >  bridge window [mem 0x90b00000-0x90bfffff]
pci 0000:00:02.2: >  bridge window [mem 0x90800000-0x908fffff 64bit pref]
pci 0000:04:00.0: >[10ec:8168] type 00 class 0x020000
pci 0000:04:00.0: >reg 10: [io  0x1000-0x10ff]
pci 0000:04:00.0: >reg 18: [mem 0x90a00000-0x90a00fff 64bit]
pci 0000:04:00.0: >reg 20: [mem 0x90900000-0x90903fff 64bit pref]
pci 0000:04:00.0: >supports D1 D2
pci 0000:04:00.0: >PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.3: >PCI bridge to [bus 04-04]
pci 0000:00:02.3: >  bridge window [io  0x1000-0x1fff]
pci 0000:00:02.3: >  bridge window [mem 0x90a00000-0x90afffff]
pci 0000:00:02.3: >  bridge window [mem 0x90900000-0x909fffff 64bit pref]
pci 0000:00:02.4: >PCI bridge to [bus 05-05]
pci 0000:00:02.5: >PCI bridge to [bus 06-06]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.GPP0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.GPP1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.GPP2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.GPP3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.GFX_._PRT]
 pci0000:00: >Requesting ACPI _OSC control (0x1d)
 pci0000:00: >ACPI _OSC control (0x1d) granted
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:01.0
SCSI subsystem initialized
ACPI: bus type scsi registered
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
e820: reserve RAM buffer [mem 0x5ac69000-0x5bffffff]
e820: reserve RAM buffer [mem 0x5ec00000-0x5fffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: >[bus 00-ff]
pnp 00:00: >[mem 0x000a0000-0x000bffff window]
pnp 00:00: >[mem 0x000c0000-0x000c1fff window]
pnp 00:00: >[mem 0x000c2000-0x000c3fff window]
pnp 00:00: >[mem 0x000c4000-0x000c5fff window]
pnp 00:00: >[mem 0x000c6000-0x000c7fff window]
pnp 00:00: >[mem 0x000c8000-0x000c9fff window]
pnp 00:00: >[mem 0x000ca000-0x000cbfff window]
pnp 00:00: >[mem 0x000cc000-0x000cdfff window]
pnp 00:00: >[mem 0x000ce000-0x000cffff window]
pnp 00:00: >[mem 0x000d0000-0x000d1fff window]
pnp 00:00: >[mem 0x000d2000-0x000d3fff window]
pnp 00:00: >[mem 0x000d4000-0x000d5fff window]
pnp 00:00: >[mem 0x000d6000-0x000d7fff window]
pnp 00:00: >[mem 0x000d8000-0x000d9fff window]
pnp 00:00: >[mem 0x000da000-0x000dbfff window]
pnp 00:00: >[mem 0x000dc000-0x000ddfff window]
pnp 00:00: >[mem 0x000de000-0x000dffff window]
pnp 00:00: >[mem 0x000e0000-0x000e1fff window]
pnp 00:00: >[mem 0x000e2000-0x000e3fff window]
pnp 00:00: >[mem 0x000e4000-0x000e5fff window]
pnp 00:00: >[mem 0x000e6000-0x000e7fff window]
pnp 00:00: >[mem 0x000e8000-0x000e9fff window]
pnp 00:00: >[mem 0x000ea000-0x000ebfff window]
pnp 00:00: >[mem 0x000ec000-0x000edfff window]
pnp 00:00: >[mem 0x000ee000-0x000effff window]
pnp 00:00: >[mem 0x7f000000-0xf7ffffff window]
pnp 00:00: >[mem 0xfc000000-0xfdffffff window]
pnp 00:00: >[mem 0xfed40000-0xfed44fff window]
pnp 00:00: >[io  0x0cf8-0x0cff]
pnp 00:00: >[io  0x0000-0x0cf7 window]
pnp 00:00: >[io  0x0d00-0xffff window]
pnp 00:00: >Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: >[io  0x0f50-0x0f51]
pnp 00:01: >[mem 0xfec00000-0xfec01fff]
pnp 00:01: >[mem 0xfee00000-0xfee00fff]
pnp 00:01: >[mem 0xf8000000-0xfbffffff]
system 00:01: >[io  0x0f50-0x0f51] has been reserved
system 00:01: >[mem 0xfec00000-0xfec01fff] could not be reserved
system 00:01: >[mem 0xfee00000-0xfee00fff] has been reserved
system 00:01: >[mem 0xf8000000-0xfbffffff] has been reserved
system 00:01: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: >[io  0x0000-0x001f]
pnp 00:02: >[io  0x0081-0x008f]
pnp 00:02: >[io  0x00c0-0x00de]
pnp 00:02: >[io  0x040b]
pnp 00:02: >[io  0x04d6]
pnp 00:02: >[dma 4]
pnp 00:02: >Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: >[io  0x00f0-0x00fe]
pnp 00:03: >[irq 13]
pnp 00:03: >Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:04: >[io  0x0070-0x0071]
pnp 00:04: >[irq 8]
pnp 00:04: >Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: >[io  0x0061]
pnp 00:05: >Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:06: >[io  0x0022-0x0023]
pnp 00:06: >[io  0x0072-0x0073]
pnp 00:06: >[io  0x0092]
pnp 00:06: >[io  0x00b0-0x00b1]
pnp 00:06: >[io  0x00b2]
pnp 00:06: >[io  0x00b8]
pnp 00:06: >[io  0x00bc]
pnp 00:06: >[io  0x00f0]
pnp 00:06: >[io  0x04d0-0x04d1]
pnp 00:06: >[io  0x0530-0x0537]
pnp 00:06: >[io  0x0800-0x0827]
pnp 00:06: >[io  0x0830]
pnp 00:06: >[io  0x0840-0x0847]
pnp 00:06: >[io  0x0b00-0x0b1f]
pnp 00:06: >[io  0x0b20-0x0b3f]
pnp 00:06: >[io  0x0c00-0x0c01]
pnp 00:06: >[io  0x0c14]
pnp 00:06: >[io  0x0c50-0x0c52]
pnp 00:06: >[io  0x0cd0-0x0cd1]
pnp 00:06: >[io  0x0cd2-0x0cd3]
pnp 00:06: >[io  0x0cd4-0x0cd5]
pnp 00:06: >[io  0x0cd6-0x0cd7]
pnp 00:06: >[io  0x0cd8-0x0cdf]
pnp 00:06: >[io  0x0cf9]
pnp 00:06: >[io  0x8100-0x81ff window]
pnp 00:06: >[io  0x8200-0x82ff window]
system 00:06: >[io  0x04d0-0x04d1] has been reserved
system 00:06: >[io  0x0530-0x0537] has been reserved
system 00:06: >[io  0x0800-0x0827] has been reserved
system 00:06: >[io  0x0830] has been reserved
system 00:06: >[io  0x0840-0x0847] has been reserved
system 00:06: >[io  0x0b00-0x0b1f] has been reserved
system 00:06: >[io  0x0b20-0x0b3f] has been reserved
system 00:06: >[io  0x0c00-0x0c01] has been reserved
system 00:06: >[io  0x0c14] has been reserved
system 00:06: >[io  0x0c50-0x0c52] has been reserved
system 00:06: >[io  0x0cd0-0x0cd1] has been reserved
system 00:06: >[io  0x0cd2-0x0cd3] has been reserved
system 00:06: >[io  0x0cd4-0x0cd5] has been reserved
system 00:06: >[io  0x0cd6-0x0cd7] has been reserved
system 00:06: >[io  0x0cd8-0x0cdf] has been reserved
system 00:06: >[io  0x0cf9] could not be reserved
system 00:06: >[io  0x8100-0x81ff window] has been reserved
system 00:06: >[io  0x8200-0x82ff window] has been reserved
system 00:06: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: >[mem 0x000e0000-0x000fffff]
pnp 00:07: >[mem 0xffc00000-0xffffffff]
pnp 00:07: >[mem 0x00000000-0xffffffffffffffff disabled]
pnp 00:07: >[mem 0xfec10000-0xfec1001f]
pnp 00:07: >[mem 0xfed00000-0xfed003ff]
pnp 00:07: >[mem 0xfed61000-0xfed613ff]
pnp 00:07: >[mem 0xfed80000-0xfed80fff]
pnp 00:07: >[Firmware Bug]: [mem 0x00000000-0xffffffffffffffff disabled] covers only part of AMD MMCONFIG area [mem 0xf8000000-0xfbffffff]; adding more reservations
system 00:07: >[mem 0x000e0000-0x000fffff] could not be reserved
system 00:07: >[mem 0xffc00000-0xffffffff] has been reserved
system 00:07: >[mem 0xfec10000-0xfec1001f] has been reserved
system 00:07: >[mem 0xfed00000-0xfed003ff] has been reserved
system 00:07: >[mem 0xfed61000-0xfed613ff] has been reserved
system 00:07: >[mem 0xfed80000-0xfed80fff] has been reserved
system 00:07: >Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:08: >[io  0x03f8-0x03ff]
pnp 00:08: >IRQ 4 override to edge, high
pnp 00:08: >[irq 4]
pnp 00:08: >Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:09: >[io  0x02f8-0x02ff]
pnp 00:09: >IRQ 3 override to edge, high
pnp 00:09: >[irq 3]
pnp 00:09: >Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0a: >[io  0x03e8-0x03ef]
pnp 00:0a: >IRQ 5 override to edge, high
pnp 00:0a: >[irq 5]
pnp 00:0a: >Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0b: >[io  0x02e8-0x02ef]
pnp 00:0b: >IRQ 10 override to edge, high
pnp 00:0b: >[irq 10]
pnp 00:0b: >Plug and Play ACPI device, IDs PNP0501 (active)
ACPI Error: Invalid/unsupported resource descriptor: Type 0x00 (20120320/utresrc-650)
pnp 00:0c: >can't evaluate _CRS: 12311
pnp 00:0c: >Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:01.0: >no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
pci 0000:00:02.1: >bridge window [io  0x1000-0x0fff] to [bus 01-01] add_size 1000
pci 0000:00:02.1: >bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01-01] add_size 200000
pci 0000:00:02.1: >bridge window [mem 0x00100000-0x000fffff] to [bus 01-01] add_size 200000
pci 0000:00:02.4: >bridge window [io  0x1000-0x0fff] to [bus 05-05] add_size 1000
pci 0000:00:02.4: >bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05-05] add_size 200000
pci 0000:00:02.4: >bridge window [mem 0x00100000-0x000fffff] to [bus 05-05] add_size 200000
pci 0000:00:02.5: >bridge window [io  0x1000-0x0fff] to [bus 06-06] add_size 1000
pci 0000:00:02.5: >bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06-06] add_size 200000
pci 0000:00:02.5: >bridge window [mem 0x00100000-0x000fffff] to [bus 06-06] add_size 200000
pci 0000:00:02.1: >res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:02.1: >res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:02.4: >res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:02.4: >res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:02.5: >res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:02.5: >res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:02.1: >res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:02.4: >res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:02.5: >res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:02.1: >BAR 14: assigned [mem 0x7f000000-0x7f1fffff]
pci 0000:00:02.1: >BAR 15: assigned [mem 0x7f200000-0x7f3fffff 64bit pref]
pci 0000:00:02.4: >BAR 14: assigned [mem 0x7f400000-0x7f5fffff]
pci 0000:00:02.4: >BAR 15: assigned [mem 0x7f600000-0x7f7fffff 64bit pref]
pci 0000:00:02.5: >BAR 14: assigned [mem 0x7f800000-0x7f9fffff]
pci 0000:00:02.5: >BAR 15: assigned [mem 0x7fa00000-0x7fbfffff 64bit pref]
pci 0000:00:01.0: >BAR 6: assigned [mem 0x7fc00000-0x7fc1ffff pref]
pci 0000:00:02.1: >BAR 13: assigned [io  0x4000-0x4fff]
pci 0000:00:02.4: >BAR 13: assigned [io  0x5000-0x5fff]
pci 0000:00:02.5: >BAR 13: assigned [io  0x6000-0x6fff]
pci 0000:00:02.1: >PCI bridge to [bus 01-01]
pci 0000:00:02.1: >  bridge window [io  0x4000-0x4fff]
pci 0000:00:02.1: >  bridge window [mem 0x7f000000-0x7f1fffff]
pci 0000:00:02.1: >  bridge window [mem 0x7f200000-0x7f3fffff 64bit pref]
pci 0000:00:02.2: >PCI bridge to [bus 02-03]
pci 0000:00:02.2: >  bridge window [io  0x2000-0x2fff]
pci 0000:00:02.2: >  bridge window [mem 0x90b00000-0x90bfffff]
pci 0000:00:02.2: >  bridge window [mem 0x90800000-0x908fffff 64bit pref]
pci 0000:00:02.3: >PCI bridge to [bus 04-04]
pci 0000:00:02.3: >  bridge window [io  0x1000-0x1fff]
pci 0000:00:02.3: >  bridge window [mem 0x90a00000-0x90afffff]
pci 0000:00:02.3: >  bridge window [mem 0x90900000-0x909fffff 64bit pref]
pci 0000:00:02.4: >PCI bridge to [bus 05-05]
pci 0000:00:02.4: >  bridge window [io  0x5000-0x5fff]
pci 0000:00:02.4: >  bridge window [mem 0x7f400000-0x7f5fffff]
pci 0000:00:02.4: >  bridge window [mem 0x7f600000-0x7f7fffff 64bit pref]
pci 0000:00:02.5: >PCI bridge to [bus 06-06]
pci 0000:00:02.5: >  bridge window [io  0x6000-0x6fff]
pci 0000:00:02.5: >  bridge window [mem 0x7f800000-0x7f9fffff]
pci 0000:00:02.5: >  bridge window [mem 0x7fa00000-0x7fbfffff 64bit pref]
pci_bus 0000:00: >resource 4 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: >resource 5 [mem 0x000c0000-0x000c1fff]
pci_bus 0000:00: >resource 6 [mem 0x000c2000-0x000c3fff]
pci_bus 0000:00: >resource 7 [mem 0x000c4000-0x000c5fff]
pci_bus 0000:00: >resource 8 [mem 0x000c6000-0x000c7fff]
pci_bus 0000:00: >resource 9 [mem 0x000c8000-0x000c9fff]
pci_bus 0000:00: >resource 10 [mem 0x000ca000-0x000cbfff]
pci_bus 0000:00: >resource 11 [mem 0x000cc000-0x000cdfff]
pci_bus 0000:00: >resource 12 [mem 0x000d0000-0x000d1fff]
pci_bus 0000:00: >resource 13 [mem 0x000d2000-0x000d3fff]
pci_bus 0000:00: >resource 14 [mem 0x000d4000-0x000d5fff]
pci_bus 0000:00: >resource 15 [mem 0x000d6000-0x000d7fff]
pci_bus 0000:00: >resource 16 [mem 0x000d8000-0x000d9fff]
pci_bus 0000:00: >resource 17 [mem 0x000da000-0x000dbfff]
pci_bus 0000:00: >resource 18 [mem 0x000dc000-0x000ddfff]
pci_bus 0000:00: >resource 19 [mem 0x000de000-0x000dffff]
pci_bus 0000:00: >resource 20 [mem 0x000e0000-0x000e1fff]
pci_bus 0000:00: >resource 21 [mem 0x000e2000-0x000e3fff]
pci_bus 0000:00: >resource 22 [mem 0x000e4000-0x000e5fff]
pci_bus 0000:00: >resource 23 [mem 0x000e6000-0x000e7fff]
pci_bus 0000:00: >resource 24 [mem 0x000e8000-0x000e9fff]
pci_bus 0000:00: >resource 25 [mem 0x000ea000-0x000ebfff]
pci_bus 0000:00: >resource 26 [mem 0x000ec000-0x000edfff]
pci_bus 0000:00: >resource 27 [mem 0x000ee000-0x000effff]
pci_bus 0000:00: >resource 28 [mem 0x7f000000-0xf7ffffff]
pci_bus 0000:00: >resource 29 [mem 0xfc000000-0xfdffffff]
pci_bus 0000:00: >resource 30 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:00: >resource 31 [io  0x0000-0x0cf7]
pci_bus 0000:00: >resource 32 [io  0x0d00-0xffff]
pci_bus 0000:01: >resource 0 [io  0x4000-0x4fff]
pci_bus 0000:01: >resource 1 [mem 0x7f000000-0x7f1fffff]
pci_bus 0000:01: >resource 2 [mem 0x7f200000-0x7f3fffff 64bit pref]
pci_bus 0000:02: >resource 0 [io  0x2000-0x2fff]
pci_bus 0000:02: >resource 1 [mem 0x90b00000-0x90bfffff]
pci_bus 0000:02: >resource 2 [mem 0x90800000-0x908fffff 64bit pref]
pci_bus 0000:04: >resource 0 [io  0x1000-0x1fff]
pci_bus 0000:04: >resource 1 [mem 0x90a00000-0x90afffff]
pci_bus 0000:04: >resource 2 [mem 0x90900000-0x909fffff 64bit pref]
pci_bus 0000:05: >resource 0 [io  0x5000-0x5fff]
pci_bus 0000:05: >resource 1 [mem 0x7f400000-0x7f5fffff]
pci_bus 0000:05: >resource 2 [mem 0x7f600000-0x7f7fffff 64bit pref]
pci_bus 0000:06: >resource 0 [io  0x6000-0x6fff]
pci_bus 0000:06: >resource 1 [mem 0x7f800000-0x7f9fffff]
pci_bus 0000:06: >resource 2 [mem 0x7fa00000-0x7fbfffff 64bit pref]
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP: reno registered
UDP hash table entries: 1024 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
NET: Registered protocol family 1
pci 0000:00:01.0: >Boot video device
PCI: CLS 32 bytes, default 64
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
audit: initializing netlink socket (disabled)
type=2000 audit(1435073353.348:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.19)
msgmni has been set to 2824
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:02.1: >irq 72 for MSI/MSI-X
pcieport 0000:00:02.2: >irq 73 for MSI/MSI-X
pcieport 0000:00:02.3: >irq 74 for MSI/MSI-X
pcieport 0000:00:02.4: >irq 75 for MSI/MSI-X
pcieport 0000:00:02.5: >irq 76 for MSI/MSI-X
pcieport 0000:00:02.1: >Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:02.1:pcie01: >service driver pcie_pme loaded
pcieport 0000:00:02.2: >Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:02.2:pcie01: >service driver pcie_pme loaded
pcieport 0000:00:02.3: >Signaling PME through PCIe PME interrupt
pci 0000:04:00.0: >Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:02.3:pcie01: >service driver pcie_pme loaded
pcieport 0000:00:02.4: >Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:02.4:pcie01: >service driver pcie_pme loaded
pcieport 0000:00:02.5: >Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:02.5:pcie01: >service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp 0000:00:02.1:pcie04: >HPC vendor_id 1022 device_id 1439 ss_vid 1022 ss_did 1234
pciehp 0000:00:02.1:pcie04: >service driver pciehp loaded
pciehp 0000:00:02.2:pcie04: >HPC vendor_id 1022 device_id 1439 ss_vid 1022 ss_did 1234
pciehp 0000:00:02.2:pcie04: >service driver pciehp loaded
pciehp 0000:00:02.3:pcie04: >HPC vendor_id 1022 device_id 1439 ss_vid 1022 ss_did 1234
pciehp 0000:00:02.3:pcie04: >service driver pciehp loaded
pciehp 0000:00:02.4:pcie04: >HPC vendor_id 1022 device_id 1439 ss_vid 1022 ss_did 1234
pciehp 0000:00:02.4:pcie04: >service driver pciehp loaded
pciehp 0000:00:02.5:pcie04: >HPC vendor_id 1022 device_id 1439 ss_vid 1022 ss_did 1234
pciehp 0000:00:02.5:pcie04: >service driver pciehp loaded
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
GHES: HEST is not enabled!
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
serial8250: ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A
serial8250: ttyS3 at I/O 0x2e8 (irq = 3) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Freeing initrd memory: 14876k freed
00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:0a: ttyS2 at I/O 0x3e8 (irq = 5) is a 16550A
00:0b: ttyS3 at I/O 0x2e8 (irq = 10) is a 16550A
ACPI Error: Invalid/unsupported resource descriptor: Type 0x00 (20120320/utresrc-650)
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ahci 0000:00:11.0: >version 3.0
ahci 0000:00:11.0: >irq 77 for MSI/MSI-X
ahci 0000:00:11.0: >AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:00:11.0: >flags: 64bit ncq sntf ilck pm led clo pmp fbs pio slum part 
scsi0 : ahci
scsi1 : ahci
ata1: SATA max UDMA/133 abar m1024@0x90c48000 port 0x90c48100 irq 77
ata2: SATA max UDMA/133 abar m1024@0x90c48000 port 0x90c48180 irq 77
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky 
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:12.2: >EHCI Host Controller
ehci_hcd 0000:00:12.2: >new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:12.2: >applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:12.2: >debug port 1
ehci_hcd 0000:00:12.2: >irq 17, io mem 0x90c48600
ehci_hcd 0000:00:12.2: >USB 2.0 started, EHCI 1.00
usb usb1: >New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: >Product: EHCI Host Controller
usb usb1: >Manufacturer: Linux 3.5.0-17-amd ehci_hcd
usb usb1: >SerialNumber: 0000:00:12.2
hub 1-0:1.0: >USB hub found
hub 1-0:1.0: >4 ports detected
ehci_hcd 0000:00:13.2: >EHCI Host Controller
ehci_hcd 0000:00:13.2: >new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:13.2: >applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:13.2: >debug port 1
ehci_hcd 0000:00:13.2: >irq 17, io mem 0x90c48500
ehci_hcd 0000:00:13.2: >USB 2.0 started, EHCI 1.00
usb usb2: >New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: >Product: EHCI Host Controller
usb usb2: >Manufacturer: Linux 3.5.0-17-amd ehci_hcd
usb usb2: >SerialNumber: 0000:00:13.2
hub 2-0:1.0: >USB hub found
hub 2-0:1.0: >4 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:12.0: >OHCI Host Controller
ohci_hcd 0000:00:12.0: >new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:12.0: >irq 18, io mem 0x90c47000
usb usb3: >New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: >Product: OHCI Host Controller
usb usb3: >Manufacturer: Linux 3.5.0-17-amd ohci_hcd
usb usb3: >SerialNumber: 0000:00:12.0
hub 3-0:1.0: >USB hub found
hub 3-0:1.0: >4 ports detected
ohci_hcd 0000:00:13.0: >OHCI Host Controller
ohci_hcd 0000:00:13.0: >new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:13.0: >irq 18, io mem 0x90c46000
usb usb4: >New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: >Product: OHCI Host Controller
usb usb4: >Manufacturer: Linux 3.5.0-17-amd ohci_hcd
usb usb4: >SerialNumber: 0000:00:13.0
hub 4-0:1.0: >USB hub found
hub 4-0:1.0: >4 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:10.0: >xHCI Host Controller
xhci_hcd 0000:00:10.0: >new USB bus registered, assigned bus number 5
xhci_hcd 0000:00:10.0: >irq 18, io mem 0x90c44000
xhci_hcd 0000:00:10.0: >irq 78 for MSI/MSI-X
xhci_hcd 0000:00:10.0: >irq 79 for MSI/MSI-X
xhci_hcd 0000:00:10.0: >irq 80 for MSI/MSI-X
xhci_hcd 0000:00:10.0: >irq 81 for MSI/MSI-X
xhci_hcd 0000:00:10.0: >irq 82 for MSI/MSI-X
usb usb5: >New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: >Product: xHCI Host Controller
usb usb5: >Manufacturer: Linux 3.5.0-17-amd xhci_hcd
usb usb5: >SerialNumber: 0000:00:10.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 5-0:1.0: >USB hub found
hub 5-0:1.0: >2 ports detected
xhci_hcd 0000:00:10.0: >xHCI Host Controller
xhci_hcd 0000:00:10.0: >new USB bus registered, assigned bus number 6
usb usb6: >New USB device found, idVendor=1d6b, idProduct=0003
usb usb6: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: >Product: xHCI Host Controller
usb usb6: >Manufacturer: Linux 3.5.0-17-amd xhci_hcd
usb usb6: >SerialNumber: 0000:00:10.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 6-0:1.0: >USB hub found
hub 6-0:1.0: >2 ports detected
usbcore: registered new interface driver libusual
i8042: PNP: No PS/2 controller found. Probing ports directly.
i8042: No controller found
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: >RTC can wake from S4
rtc_cmos 00:04: >rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
  Magic number: 3:246:488
regulator regulator.0: >hash matches
rtc_cmos 00:04: >setting system clock to 2015-06-23 15:29:15 UTC (1435073355)
powernow-k8: Found 1 AMD GX-420CA SOC with Radeon(tm) HD Graphics    (4 cpu cores) (version 2.20.00)
powernow-k8:    0 : pstate 0 (2000 MHz)
powernow-k8:    1 : pstate 1 (1800 MHz)
powernow-k8:    2 : pstate 2 (1600 MHz)
powernow-k8:    3 : pstate 3 (1200 MHz)
powernow-k8:    4 : pstate 4 (1000 MHz)
powernow-k8:    5 : pstate 5 (800 MHz)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
usb 1-1: >new high-speed USB device number 2 using ehci_hcd
usb 1-1: >New USB device found, idVendor=05e3, idProduct=0608
usb 1-1: >New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-1: >Product: USB2.0 Hub
hub 1-1:1.0: >USB hub found
hub 1-1:1.0: >4 ports detected
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-9: ADATA_ISMS312-008GMH, r0.23P01, max UDMA/100
ata1.00: 15646720 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata2.00: ATA-8: SM611GXB BA, M0425C, max UDMA/133
ata2.00: 61865984 sectors, multi 0: LBA48 
ata1.00: configured for UDMA/100
scsi 0:0:0:0: >Direct-Access     ATA      ADATA_ISMS312-00 r0.2 PQ: 0 ANSI: 5
ata2.00: configured for UDMA/133
sd 0:0:0:0: >[sda] 15646720 512-byte logical blocks: (8.01 GB/7.46 GiB)
sd 0:0:0:0: >Attached scsi generic sg0 type 0
sd 0:0:0:0: >[sda] Write Protect is off
sd 0:0:0:0: >[sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: >[sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 < sda5 >
sd 0:0:0:0: >[sda] Attached SCSI disk
scsi 1:0:0:0: >Direct-Access     ATA      SM611GXB BA      M042 PQ: 0 ANSI: 5
sd 1:0:0:0: >[sdb] 61865984 512-byte logical blocks: (31.6 GB/29.5 GiB)
sd 1:0:0:0: >Attached scsi generic sg1 type 0
sd 1:0:0:0: >[sdb] Write Protect is off
sd 1:0:0:0: >[sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: >[sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 >
sd 1:0:0:0: >[sdb] Attached SCSI disk
Freeing unused kernel memory: 928k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1468k freed
Freeing unused kernel memory: 1100k freed
udevd[103]: starting version 175
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:04:00.0: >(unregistered net_device): unknown MAC, using family default
r8169 0000:04:00.0: >irq 83 for MSI/MSI-X
r8169 0000:04:00.0: >eth0: RTL8168b/8111b at 0xffffc9000035e000, 00:e0:4c:68:03:01, XID 0c000800 IRQ 83
r8169 0000:04:00.0: >eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:00:14.7: >SDHCI controller found [1022:7813] (rev 1)
mmc0: no vmmc regulator found
Registered led device: mmc0::
mmc0: SDHCI controller on PCI [0000:00:14.7] using ADMA
usb 1-4: >new high-speed USB device number 4 using ehci_hcd
EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
Refined TSC clocksource calibration: 1996.256 MHz.
Switching to clocksource tsc
usb 1-4: >New USB device found, idVendor=0403, idProduct=6014
usb 1-4: >New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-4: >Product: ASTRO USB
usb 1-4: >Manufacturer: ASTRO
usb 1-4: >SerialNumber: ASXEHF8Q
Adding 3597308k swap on /dev/sdb6.  Priority:-1 extents:1 across:3597308k SS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[366]: starting version 175
lp: driver loaded but no devices found
i2c /dev entries driver
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
acpi device:2f: >registered as cooling_device4
ACPI: Video Device [VGA1] (multi-head: yes  rom: no  post: no)
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input3
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Disabling lock debugging due to kernel taint
[fglrx] Maximum main memory to use for locked dma buffers: 1329 MBytes.
[fglrx]   vendor: 1002 device: 9831 count: 1
[fglrx] ioport: bar 4, base 0x3000, size: 0x100
[fglrx] Kernel PAT support is enabled
[fglrx] module loaded - fglrx 13.15.3 [Aug 19 2013] with 1 minors
piix4_smbus 0000:00:14.0: >SMBus Host Controller at 0xb00, revision 0
AMD GPIO Driver v0.1
microcode: CPU0: patch_level=0x0700010f
usb 4-1: >new full-speed USB device number 2 using ohci_hcd
AMD SPI Driver v0.1
amd_spi 0000:00:14.3: >master is unqueued, this is deprecated
usb 4-1: >New USB device found, idVendor=067b, idProduct=2303
usb 4-1: >New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-1: >Product: USB-Serial Controller D
usb 4-1: >Manufacturer: Prolific Technology Inc. 
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
USB Serial support registered for generic
usbcore: registered new interface driver pl2303
USB Serial support registered for pl2303
pl2303 4-1:1.0: >pl2303 converter detected
microcode: failed to load file amd-ucode/microcode_amd_fam16h.bin
microcode: CPU1: patch_level=0x0700010f
microcode: failed to load file amd-ucode/microcode_amd_fam16h.bin
microcode: CPU2: patch_level=0x0700010f
microcode: failed to load file amd-ucode/microcode_amd_fam16h.bin
microcode: CPU3: patch_level=0x0700010f
microcode: failed to load file amd-ucode/microcode_amd_fam16h.bin
microcode: Microcode Update Driver: v2.00 , Peter Oruba
usb 4-1: >pl2303 converter now attached to ttyUSB0
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
usb 4-3: >new full-speed USB device number 3 using ohci_hcd
usb 4-3: >New USB device found, idVendor=067b, idProduct=2303
usb 4-3: >New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-3: >Product: USB-Serial Controller D
usb 4-3: >Manufacturer: Prolific Technology Inc. 
pl2303 4-3:1.0: >pl2303 converter detected
usb 4-3: >pl2303 converter now attached to ttyUSB1
usb 3-2: >new full-speed USB device number 2 using ohci_hcd
usb 3-2: >New USB device found, idVendor=067b, idProduct=2303
usb 3-2: >New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2: >Product: USB-Serial Controller D
usb 3-2: >Manufacturer: Prolific Technology Inc. 
pl2303 3-2:1.0: >pl2303 converter detected
usb 3-2: >pl2303 converter now attached to ttyUSB2
usb 1-1.3: >new low-speed USB device number 5 using ehci_hcd
usb 1-1.3: >New USB device found, idVendor=0603, idProduct=00f2
usb 1-1.3: >New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.3: >Product: USB Keyboard
usb 1-1.3: >Manufacturer: NOVATEK
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1.3/1-1.3:1.0/input/input4
hid-generic 0003:0603:00F2.0001: >input,hidraw0: USB HID v1.10 Keyboard [NOVATEK USB Keyboard] on usb-0000:00:12.2-1.3/input0
input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1.3/1-1.3:1.1/input/input5
hid-generic 0003:0603:00F2.0002: >input,hiddev0,hidraw1: USB HID v1.10 Device [NOVATEK USB Keyboard] on usb-0000:00:12.2-1.3/input1
usb 1-1.4: >new full-speed USB device number 6 using ehci_hcd
usb 1-1.4: >New USB device found, idVendor=046d, idProduct=c52b
usb 1-1.4: >New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.4: >Product: USB Receiver
usb 1-1.4: >Manufacturer: Logitech
logitech-djreceiver 0003:046D:C52B.0005: >hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.2-1.4/input2
input: Logitech Unifying Device. Wireless PID:101b as /devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1.4/1-1.4:1.2/0003:046D:C52B.0005/input/input6
logitech-djdevice 0003:046D:C52B.0006: >input,hidraw3: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:101b] on usb-0000:00:12.2-1.4:1
EXT4-fs (sdb5): re-mounted. Opts: errors=remount-ro
init: failsafe main process (850) killed by TERM signal
ppdev: user-space parallel port driver
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
type=1400 audit(1435044558.805:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=951 comm="apparmor_parser"
type=1400 audit(1435044558.805:3): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=951 comm="apparmor_parser"
type=1400 audit(1435044558.805:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=958 comm="apparmor_parser"
type=1400 audit(1435044558.809:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=958 comm="apparmor_parser"
type=1400 audit(1435044558.813:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=959 comm="apparmor_parser"
type=1400 audit(1435044558.813:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper//chromium_browser" pid=959 comm="apparmor_parser"
type=1400 audit(1435044558.817:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=960 comm="apparmor_parser"
type=1400 audit(1435044558.817:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper//chromium_browser" pid=960 comm="apparmor_parser"
type=1400 audit(1435044558.817:10): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=961 comm="apparmor_parser"
r8169 0000:04:00.0: >eth0: link down
r8169 0000:04:00.0: >eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
vesafb: mode is 1280x1024x32, linelength=5120, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0x80000000, mapped to 0xffffc90005480000, using 5120k, total 5120k
Console: switching to colour frame buffer device 160x64
fb0: VESA VGA frame buffer device
fglrx_pci 0000:00:01.0: >irq 84 for MSI/MSI-X
[fglrx] Firegl kernel thread PID: 1322
[fglrx] Firegl kernel thread PID: 1323
[fglrx] Firegl kernel thread PID: 1324
[fglrx] IRQ 84 Enabled
[fglrx] Reserved FB block: Shared offset:0, size:1000000 
[fglrx] Reserved FB block: Unshared offset:fe68000, size:198000 
[fglrx] Reserved FB block: Unshared offset:1ffef000, size:11000 
[fglrx] ATIF platform detected with notification ID: 0x81
r8169 0000:04:00.0: >eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

Return To AMD GX-420CA SOC System Information